Red
Black
Red
Black

Eggbeater 1 Clip-In Pedals

SKU: 14792

Light and minimal clip-in pedal.

 

  • Minimal & lightweight
  • 4-sided entry / superior mud shedding
  • Customizable float and release angle
  • Premium bearings
  • Double seal system
  • 5 year warranty
  • Owners Manual and Technical Documents here

gravel

trail

xc

$64.99 USD $57.99 USD Save $7.00
/
  • Add Shoes & Save 20% Using Code: MATCHBUNDLE
Color
  • In stock, ready to ship
  • Inventory on the way
Final Sale

Body Material Stamped steel

Body Dims (L x W) 32mm x 75mm

Wing Material Stamped steel

Spindle Length 52mm

Inner Bearing Type Igus LL-glide bearing

Outer Bearing Type Enduro cartridge bearing

Endcap Slotted

Spindle Material Forged SCM 435 Chromoly Steel

Spring Material 300 series stainless steel

Max Rider Weight No restriction

Weight 290g per pair

Included Cleat Type 10° Easy Release, 6° Float

Cleat Notice Third-party cleats are not approved for use with Crankbrothers pedal systems. Using non-Crankbrothers cleats can reduce pedal lifespan and voids the pedal warranty.

Warranty 5 years

Cleats: CUSTOMIZE YOUR FLOAT & RELEASE ANGLE

Choose our new Easy Release cleats with a forgiving 10° release, or our Standard Release cleats with 15° release optimized for intermediate to advanced riders.
Continue reading

FAQ - Clip-In Pedals

All Crankbrothers clip-in pedal systems contain two pedals (one left pedal, one right pedal), one pair of cleats with mounting hardware, and one Crankbrothers icon sticker.

Most Crankbrothers clip-in pedals come with our 6-degree float, Standard Release cleats. Our Candy 1, Eggbeater 1, and Double Shot 1 pedals come with our Easy Release cleats instead, with a smaller release angle required to unclip but still featuring 6 degrees of float.

Although closely related, float and release angle refer to separate characteristics of our cleats. "Float" is what we call the amount of rotational free play while clipped-in, whereas "Release Angle" refers to the angle of rotation of the cleat required to completely exit from the pedal, ie "unclip".

All standard bicycle pedal spindles are threaded specifically for either the left or right side of your bike, ours included - it's important to double check you're installing the correct pedal to the matching crank arm to avoid damage. A close inspection of the flange of the pedal spindle will indicate either Left side (with a grooved flange) or Right side (with a flat flange).

You'll need an 8mm hex wrench and bike grease for proper installation of your pedals - watch our tutorial here!

Maintenance schedules can vary greatly depending on riding conditions and mileage, but as a general rule of thumb, we recommend a seasonal re-grease of the internal components to keep things running smoothly. We also offer refresh kits with new bearings, seals, and hardware when a full overhaul is desired. Pro tip: Avoid using a pressure washer at close distances to clean your pedals, as water could get past the external seals and displace the grease your pedals need to spin freely.

No - SPD cleats won't work with our pedals.

Although we always recommend using Crankbrothers shoes featuring MATCH Technology for an optimized setup right out of the box, any MTB or Gravel shoes which feature a recessed two-hole cleat mounting box are compatible with our pedal system. With third-party footwear, it may be necessary to use additional shims or traction pads to fine-tune the shoe-to-pedal interface [pro tip: use our Cleat Tool to find your ideal shim setup]. In addition, you can even adapt a three-hole road shoe to be compatible with our Eggbeater or Candy pedals with the use of our adapter kit.

Product Support

Support Documents

Overall rating: 4.730769 / 5 from 26 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["design","look","value","work","set","pedals","eggbeaters","cleats","clip"].

Review highlights

Reviews

Great pedals. Simple design. Easy

"Great pedals. Simple design. Easy clip in/out. Don’t get clogged up with mud. Look great!"

— Ewan E. (5/5)

Once I discovered the rugged

"Once I discovered the rugged simplicity of Eggbeater pedals there was no going back! Tough on the outside, with all the machined running surfaces protected from the mud and grit on a mountain bike trail. I use the same pedals on my gravel bike now as well, as it's my main road bike ride now."

— Laszlo T. (5/5)

Have titanium pedals too. But

"Have titanium pedals too. But these are great value that still work well"

— Andrew B. (4/5)

great base model

"great for my commuter / gravel bike. for the base model they work very well"

— Rob (5/5)

An affordable pedal that lasts

"I have used these eggbeaters on two different bikes and they are still going. An easy rebuild every few years keep them running smoth."

— Steve L. (5/5)

praise pedal!

"praise pedal!"

— Yasuhiko H. (5/5)

Cleats are very smooth. The

"Cleats are very smooth. The Eggbeaters look great and work very well. I’m extremely happy with how minimalist they are but clip in easy."

— Jeremy B. (5/5)

I love Crank Brothers pedals!

"I love Crank Brothers pedals! I know they are not advertised for use on road bikes, but I wear MTB style shoes, so I have them on all my bikes. They are super easy to clip in and out, and the cleats don't make me sound like a horse when walking around! I love the fact that you can clip into any side of the pedal, so you don't really even have to think about it, unlike some SPD or road style pedal and cleat systems. And they are very light weight. I use the Eggbeaters on my road bikes and the Candy pedals on my gravel bike so I can ride with regular shoes if I want to."

— Jeff S. (5/5)

Super simple and works great

"Super simple and works great"

— Shane B. (5/5)

Excellent quality and easy to

"Excellent quality and easy to use. I have these pedals on multiple bikes."

— David K. (5/5)

Q&A