|
Pedal installation
Smarty and MXR pedals have a 6mm hex on the end of the spindles.
For identification, left pedal has a small groove around the
spindle flange. Important: The right spindle has right-handed
threads, and the left spindle has left-handed threads. Grease
the spindle threads and then tighten the pedals to 25 to 30
foot pounds torque (34 to 41Nm) with a 6mm hex.
Smarty pedals only: replacing rails:To change the color of
the Rails, the Rails can be replaced. Follow the instructions
carefully.
features
Smarty and Egg Beater MXR pedals share the same internal components.
Smarty pedals are 2-sided with 4-sided entry. Egg Beater MXR
pedals are 4-sided. The design allows you to clip in, in a
variety of ways not possible with other pedals. Additionally,
Smarty and Egg Beater MXR pedals are light, extremely mud
resistant, durable, and have 6 degrees of rotational float.
|
